The EK-160 monopolar cutting electrocoagulator is designed for use in obstetrics, dermatology and other clinical settings where high cutting capacity is not required. The model EK-160 electrosurgical unit has one output for cutting and coagulation. These outputs can be used for both monopolar and bipolar effects. Patient safety is a priority in the device. The instrument tests all modes at start-up and permits use after detecting no problems. If a problem occurs, the instrument will automatically turn off the power and prevent the user from operating. The cutting and coagulation warning sounds are different in the instrument and can be distinguished during use. In addition, the device gives an audible warning when the plate loses contact with the patient.
Due to its small size and light weight, the device is suitable for placement and carrying in any narrow space. . Patient safety is a priority in the device, and the device allows use after testing all modes at startup and finding no problems, and automatically turns off the output when it comes into contact with the patient plate. The incision and coagulation warning sounds are different on the machine and may be noticeable during use. In addition, if the plate is lost contact with the patient, the device continues to give an audible warning. Due to its small size and low weight, the device can be placed and carried in any narrow space.
Device operating modes
Monopolar - Bipolar
Voice notification system
Automatic check on every boot